FL-6ASH, FL-6ASL Cat.6A Shield Patch Cord, S/FTP, 26AWG
Product advantage
- Comply with ANSI/TIA 568.2-D, TIA/EIA 568-B.2-10 Cat.6A and ISO/IEC 11801 2nd class EA, with a transmission bandwidth of 500MHz.
- Use Cat.6A double-layer shielded S/FTP 26AWG stranded copper wire; Two terminal crimping shielded standard RJ45 connector.
- The outer coating material is PVC or LSOH low smoke halogen-free type.
- It supports 10GBase-T applications and is downward compatible with any class E (Cat.6) and class D (Cat.5E) system wiring.
- Comply with ROHS 2011/65/eu environmental protection standards.
Product characteristics
RJ45 connector conforms to ul/csa FCC part 68, sub part f
Cable insulation material conforms to UL-94V-0
Contact plating: 50 μ Gold Plated / 100 μ nickel plating
Interface plugging times: >1000 (IEC 603.7/classa)
Plug and pull resistance: minimum 11lbf (50N)
Maximum DC resistance: <9.38 Ω /100m at 20 ℃
Mutual capacitance: <5.6nf/100m
Applicable temperature: -20 ℃ to +75 ℃
Insulation strength (conductor conductor):1000VAC, 60hz/1min
Insulation impedance: >500M ohms (500VDC)
Contact impedance: <35M ohm
Rated voltage / current: 150VAC/1.5Ampere
Inner conductor wire gauge: stranded copper (26AWG)
Cable sheath material: PVC or LSOH: low smoke and halogen-free
conforming to IEC 60332-1-2
Meet the standards
TIA/EIA 568-B.2-10 Category 6A
ANSI/TIA 568.2-D Category 6A
ISO/IEC 11801 2nd Edition Class EA
EN 50173 2nd Edition
EN 55022 Class B
Can be used
10/100Base-TX
1000Base-T
2.5G/5GBase-T
10GBase-T
155/622Mbps ATM
1.2/2.4Gbps ATM
TP-PMD
4/16Mbps Token Ring
ISDN
VoIP
4PPoE compliant
Order information
P2.05.05_Cat.6A Shielded Patch Cord, S-FTP, 26AWG.pdf
Recommend
-
-
QQ Zone
-
Sina Weibo
-
Renren.com
-
Douban