FL-6A8HH, FL-6A8HL Cat.6A Shielded slight Patch Cord, U/FTP, 28AWG
Product advantage
-Comply with ANSI/TIA 568.2-D, TIA/EIA 568-B.2-10 Cat.6A and ISO/IEC 11801 2nd Class EA standard, transmission bandwidth up to 500MHz.
-Use Cat.6A shielded U/FTP 28AWG stranded copper wire; Two terminal crimping shielded standard RJ45 connector.
-The outer coating material is PVC or LSOH low smoke halogen-free type.
-It supports 10GBase-T applications and is downward compatible with any class E (cat.6) and class D (cat.5e) system wiring.
-Comply with ROHS 2011/65/eu environmental protection standards.
Product characteristics
RJ45 connector conforms to UL/CSA FCC part 68, sub part F
Cable insulation material conforms to UL-94V-0
Contact plating: 50μ Gold Plated / 100μ plate with nickel
Interface plugging times: >1000 (IEC 603.7/classa)
Plug and pull resistance: minimum 11lbf (50N)
Maximum DC resistance: <22.3 Ω /100m (28Awg) at 20 ℃
Mutual capacitance: <5.6nf/100m
Applicable temperature: -20 ℃ to +75 ℃
Insulation strength (conductor conductor): 1000VAC, 60hz/1min
Insulation impedance: >500M ohms (500VDC)
Contact impedance: <35M ohms
Rated voltage / current: 150VAC/1.5Ampere
Cable outer diameter: 5.3+/-0.2mm (28AWG)
Cable sheath material: PVC or LSOH: low smoke and halogen-free conforming to IEC 60332-1-2
Meet the standards
TIA/EIA 568-B.2-10 Category 6A
ANSI/TIA 568.2-D Category 6A
ISO/IEC 11801 2nd Edition Class EA
EN 50173 2nd Edition
EN 55022 Class B
Can be used
10/100Base-TX
1000Base-T
2.5G/5GBase-T
10GBase-T
155/622Mbps ATM
1.2/2.4Gbps ATM
TP-PMD
4/16Mbps Token Ring
ISDN
VoIP
Order information
Transmission Characteristics
P2.05.06_Cat.6A Shielded slight Patch Cord, U-FTP, 28AWG.pdf
Recommend
-
-
QQ Zone
-
Sina Weibo
-
Renren.com
-
Douban