Product advantage

- Cat.5E shielded module meets ANSI/TIA 568.2-D Cat.5E、ISO/IEC 11801 2nd Class D and EN 50173 2nd Edition standards, with transmission bandwidth up to 100MHz and UL unit testing certification.

- The module body is formed by metal mold, providing 360° shielding layer, which can achieve the best shielding effect.

- The module is equipped with a rotary dust cover to reduce dust intrusion (IP20 rated) and reduce the failure rate of the module.

- The circuit board IDC terminal adopts the solder free bonding technology (press in), which can effectively reduce the capacitance effect suppress crosstalk.

- The module has EIA color code sticker, which conforms to two wiring methods of T568A and T568B.

- It supports the quick installation mode of the traditional 110 threading tool and the special 4-Pair threading tool (FL-KM18T).

- Comply with RoHS 2011/65/EU environmental protection standards.

Product characteristics

Shell metal material: zinc alloy

Plastic material in shell: fire resistant ABS (according to UL-94V-0

Contact material: copper tin plating

Contact plating: 50μ Gold Plated / 100μ plate with nickel

Interface plugging times: >1000

IDC wiring and termination times: >200

Plug and pull resistance: minimum 11lbf (50N) between plug and interface

Contact pressure of plug and interface: 100 grams minimum for each contact

Operating temperature: -40 ℃ to +75 ℃

Insulation strength (conductor conductor):1000VAC, 60Hz/1min

Insulation impedance: >500M ohms (500VDC)

Contact impedance: <20M ohm

Rated voltage / current: 150VAC/1.5Ampere

Meet the standards

TIA/EIA 568-B.2 Category 5E

ANSI/TIA 568.2-D Category 5E

ISO/IEC 11801 2nd Edition

EN 50173 2nd Edition

EN 55022 Class B

Can be used

10/100Base-TX

1000Base-T

155/622 Mbps ATM

TP-PMD(ANSI X3T9.5 100Mbps)

4/16Mbps Token Ring

ISDN

VoIP

PoE

Order information

P2.07.05_Cat.5E Shielded Module（Keystone Jack）.pdf

P2.07.05_超五类屏蔽模块.pdf