Product advantage

- ANSI/TIA 568.2-D Cat.5E, ISO/IEC 11801 2nd Class D characteristic standard, with a transmission bandwidth of 100MHz.

- The outer skin is made of standard flame-retardant material and can be selected with flame-retardant PVC and LSOH low smoke halogen-free.

- It adopts mechanical rubber filled protective sleeve and has RJ45 shrapnel protection design.

- It can provide jumpers of eight colors, meeting TIA-606 color management standard.

- Comply with ROHS 2011/65/EU environmental protection standards.

Product characteristics

RJ45 connector conforms to UL/CSA FCC part 68, sub part F

Cable insulation material conforms to UL-94V-0

Contact plating: 50μ Gold Plated / 100μ plate with nickel

Interface plugging times: >1000

Plug and pull resistance: minimum 11lbf (50N) between plug and interface

Maximum DC resistance: <9.38 Ω /100m at 20 ℃

Mutual capacitance: <5.6nf/100m

Applicable temperature: -20 ℃ to +75 ℃

Insulation strength (conductor conductor):1000VAC, 60hz/1min

Insulation impedance: >500M ohms (500VDC)

Contact impedance: <35M ohms

Rated voltage / current: 150VAC/1.5Ampere

Inner conductor gauge: 24AWG stranded or solid copper

Cable sheath material: PVC or LSOH in accordance with IEC 60332-1-2

Meet the standards

ANSI/TIA 568.2-D Category 5E

ISO/IEC 11801 2nd Edition

EN50173 2nd Edition

EN50288-3-2

EN55022 Class B

IEC 60332-1-2

Can be used

10/100Base-TX

1000Base-T

2.5GBASE-T

155/622 Mbps ATM

TP-PMD(ANSI X3T9.5 100Mbps)

4/16Mbps Token Ring

ISDN

VoIP

PoE

Order information

P2.07.08_Cat.5E Unshielded Patch Cord，U-UTP, 24AWG.pdf

P2.07.08_超五类非屏蔽跳线 U-UTP,24AWG.pdf