Armored optical fiber patch cord
*. The two ends of armored optical fiber Patch Cord are two simplex LC Connecter by default. (marked with AB, convenient for field polarity conversion)
Simplex to Duplex
*. If duplex LC-LC is required, it should be noted that the finished product can be added with transparent buckle before leaving the factory.
Product advantage
- Comply with ANSI/TIA 568.3-D, TIA/EIA 568-B.3, ISO/IEC 11801 2nd amendment standards.
- Provide Maxcap safe 300 (50/125μM bending resistant BIOM3), Maxcap safe 550 (50/125μM bending resistant BIOM4) and Terasafe plus (9/125μm OS2、ITU-T G.652D、G.657. A2) and other series products.
- Precision ceramic plating zirconia ferrale design, convex lens grinding polishing, low loss, suitable for LAN/WAN and CATV/CCTV applications.
- Support 1G/10GBase SX/SR, 10G/40G/100GBase LR/ER, ATM, FTTx and other network applications. ST, SC, FC, LC and MTRJ connectors can be provided according to the needs of equipment interfaces.
- A digital identification ring is provided to distinguish the receiving end from the sending end.
- Operating temperature range: -20 ℃ ~+70 ℃.
- Comply with RoHS 2011/65/EU environmental protection standards.
Meet the standards
TIA/EIA 568-B.3
ANSI/TIA 568.3-D
ISO/IEC 11801 2nd Edition
IEC 874-10
Optical characteristics
P3.03.05_Armored optical fiber patch cord.pdf
Recommend
-
-
QQ Zone
-
Sina Weibo
-
Renren.com
-
Douban