Pre terminated Fiber Trunk Cable

01预端接主干光缆.png

03 预端接主干光缆.jpg

Product advantage

- Fastlinkcabsys pre terminated trunk cable provides application options for OM3, OM4 laser optimized multimode and OS2 zero water peak single-mode; Comply with ANSI/TIA 568.3-D and ISO/IEC 11801 2nd amendment standards.

- MPO low loss optical fiber connector is adopted, with the insertion loss of <0.35db, and the link channel has good attenuation allowance, so that you have the best flexibility when designing the wiring system.

- Multi mode MPO connector is physical contact polish (PC) interface; The single-mode MPO connector is an angled physical contact polish (APC) green low loss interface, and the insertion loss is also <0.35db.

- Optimize the cable routing, effectively use the wiring path and space, and significantly reduce the installation time and cost. (Fastlinkcabsys trunk cable adopts double-layer LSOH outer sheath design to provide the best buffer protection;With flexibility and reliability, it is especially suitable for the rapid deployment of data centers.)

- The standard branch length is 60±3cm, and the pull wire net cover can be purchased at the single end.

- Inspect the optical performance and reliability when leaving the factory to ensure the quality of the link.

- It meets the polarity requirements of ANSI/TIA 568.3-D optical fiber, and can provide type-A, type-B and type-C types. (the default type of Fastlink prefabricated optical fiber cabling system is type-B).

- MPO connector complies with IEC 61754-7 standard.

- Comply with ROHS 2011/65/EU environmental protection standards.