Pre terminated Optical fiber Modular cassette

01 模组盒.jpg


Product advantage


- Fastlinkcabsys pre terminated fiber module provides OM4 multimode and OS2 zero water peak singlemode, comply with ANSI/TIA 568.3-D and ISO/IEC 11801 2nd amendment standards.

- MPO adopts 0.35db low attenuation optical fiber connector, and the link channel has excellent attenuation margin, so that you have the best design flexibility when designing the cabling system.

- Multi mode MPO connector is physical contact Polish interface; Single mode MPO connector is Angled physical contact Polish green low loss interface.

- Inspect the optical performance and reliability when leaving the factory to ensure the quality of the link. With installation flexibility and stability, it is especially suitable for the rapid deployment of DC.

- Support 10G, 40G and 100Gbps sequence or parallel transmission application architecture.

- Comply with ANSI/TIA 568.3-D optical fiber polarity requirements, and provide type Enhanced B wiring mode. 

 (Fastlink pre terminated optical modular cassette adopts type Enhanced B by default).

- MPO connector complies with IEC 61754-7 standard.

- Comply with RoHS 2011/65/EU environmental protection standards.



Optical properties of products

Maximum insertion loss value: ≤ 0.50 dB

Change of insertion loss after plugging: ≤ 0.35 dB

Change of temperature to insertion loss: ≤ 0.35 dB

Applicable temperature:

 -40 ~ +70 ℃ (in stock)

 -40 ~ +70 ℃ (during operation)



Order information

02 Order information.jpg


04 链路架构图.jpg


05 技术参数E.jpg


P4.03.09_Pre terminated Optical fiber Modular cassette.pdf


P4.03.09_预端接光纤模组.pdf

Recommend

  • QQ Zone

  • Sina Weibo

  • Renren.com

  • Douban

取消
建站ABC 建站ABC提供技术支持
  • Home
  • Exhibition
  • Msg