Pre terminated Array cord
Product advantage
- Fastlinkcabsys MPO Array patch cord provides OM3, OM4 laser optimized flexible multimode and OS2 zero water peak application selection of flexible single mode; comply with ANSI/TIA 568.3-D and ISO/IEC 11801 standards.
- MPO low loss optical fiber connector is adopted, and the link channel has excellent attenuation allowance, so that when you design the cabling system, it has the best design flexibility.
- Multi mode MPO connector is physical contact polish (PC) interface; Single mode MPO connector is angled Physical contact polish (APC) green low loss interface.
- The array patch cord is suitable for providing equipment to equipment, equipment to fiber patch panel (storage box) or fiber patch panel (storage box) - the application of patching between fiber patch panel (storage box).
- Verify the optical performance and reliability in the factory to ensure the quality of jumpers.
- Meet ANSI/TIA 568.3-D fiber polarity requirements, and provide type-A, Type-B and type-C.
(the default type of fastlinkcabsys prefabricated optical fiber cabling system is type-B).
- Support 10G, 40G and 100Gbps sequence or parallel transmission application architecture.
- The color coding of optical fiber and cable shall comply with ANSI/TIA-598-C standard.
- Indoor optical fiber is designed and manufactured according to TIA 472C000-B/ICEA S-83-596-2001 standard.
- MPO connector complies with IEC 61754-7 standard.
- Comply with ROHS 2011/65/EU environmental protection standards.
Product characteristics
Unit: 12 cores
12 core optical cable diameter: 3.0mm
Weight of optical cable: 19~27kg/km (12 ~ 24C)
Bending radius (IEC 60794-1-2-E11):
30 x optical cable diameter (during installation)
15 x optical cable diameter (during operation)
Tensile strength (IEC 60794-1-2-E1):
200N (during operation)
334N (during installation)
Impact force (IEC 60794-1-2-E4): 0.74N-m
Torque (IEC 60794-1-2-E7): 10 cycles
Flame retardant low smoke halogen-free (LSOH):
IEC 60332-1-2、IEC 60754-2
IEC 61034-1、IEC 61034-2
Applicable temperature (IEC 60794-1-2-F1):
-20 ~ +75 ℃ (in stock)
-10~ +65 ℃ (during operation)
Optical properties of products
Change of insertion loss after plugging: ≤ 0.35 dB
Change of temperature to insertion loss: ≤ 0.35 dB
Technical parameter
Recommend
-
-
QQ Zone
-
Sina Weibo
-
Renren.com
-
Douban