FL-6FH,FL-6FL Cat.6 Shielded Patch Cord, F/UTP, 26AWG
Product advantage
-Comply with TIA/EIA 568-B.2-1, ANSI/TIA 568.2-D Cat.6 and ISO/IEC 11801 2nd class E.
-Cat.6 multi strand copper stranded Patch Cord, cross isolation between pairs, transmission bandwidth up to 250MHz.
-Cat.6 shielded F/UTP 26AWG stranded copper wire is adopted; two terminal crimping shielded standard RJ45 connector.
-The outer skin is made of standard fire-resistant material and can be PVC or LSOH low smoke halogen-free.
-It adopts rubber filled protective sleeve and has RJ45 shrapnel protection design. (assembled short jacket design is also available)
-It can provide jumpers of eight colors, meeting TIA-606 color management standard.
-Comply with ROHS 2011/65/EU environmental protection standards.
Product characteristics
RJ45 connector conforms to UL/CSA FCC part 68, sub part F
Cable insulation material conforms to UL-94V-0
Contact plating: 50μ Gold Plated /100μ plate with nickel
Interface plugging times: >1000
Plug and pull resistance: minimum 11lbf (50N) between plug and interface
Maximum DC resistance: <9.38Ω /100m at 20 ℃
Mutual capacitance: <5.6nf/100m
Applicable temperature: -20℃ to +75℃
Insulation strength (conductor): 1000VAC, 60hz/1min
Insulation impedance: >500M ohms (500VDC)
Contact impedance: <35M ohm
Rated voltage / current: 150VAC/1.5Ampere
Inner conductor gauge: 26AWG stranded
Cable sheath material: PVC or LSOH in accordance with IEC 60332-1-2
Meet the standards
TIA/EIA 568-B.2
ANSI/TIA 568.2-D
ISO/IEC 11801 2nd Edition
EN 50173 2nd Edition
EN 55022 Class B
Can be used
10/100Base-TX
1000Base-T
2.5G/5GBase-T
155/622 Mbps ATM
TP-PMD(ANSI X3T9.5 100Mbps)
4/16Mbps Token Ring
ISDN
VoIP
PoE+ compliant
Order information
P2.06.10_Cat.6 Shielded Patch Cord,F-UTP,26AWG.pdf
Recommend
-
-
QQ Zone
-
Sina Weibo
-
Renren.com
-
Douban