2019-12-31

Product advantage - It adopts advanced stranding process, conforms to ANSI / TIA 568.2-D Cat. 6, ISO / IEC 11801 2nd class E characteristic standard. - The cable center adopts the cross isolation structure design to prevent the line pair deformation and effectively reduce the generation of crosstalk. The transmission bandwidth can reach up to 250MHz. - Compatible with Fastlinkcabsys full series copper connectors. - The outer skin is made of standard flame-retardant material and can be flame-retardant PVC and LSOH low smoke halogen-free. -Comply with ROHS 2011 / 65 / EU environmental protection standard.

2022-06-27

Product advantage- It adopts advanced stranding process and conforms to ANSI/TIA 568.2-D Cat.6, ISO/IEC 11801 2nd class E characteristic standard.- The cable center adopts a cross isolation structure design to prevent pair deformation and effectively reduce crosstalk. The transmission bandwidth can reach up to 250MHz.- Compatible with fastlinkcabsys full series copper cable connectors.- The outer skin is made of PE, and black can effectively resist the penetration of ultraviolet rays to cause th

2019-12-31

-Cat.6 Unshielded Module complies with ANSI / TIA568 2-D Cat. 6、ISO/IEC 11801 2nd Class E and EN50173 2nd edition standard; The transmission bandwidth is more than 250MHz. -Support PoE + + (Type 4) application and passed ETL test. -The 110 IDC terminal of the circuit board adopts the press in technology, which can effectively reduce the capacitance effect and suppress the crosstalk. -The module is equipped with a rotary dust cover to reduce dust intrusion (IP20 rated). Eight modules of different colors can be selected according to the needs of application. Comply with TIA-606 color management standard. -Provide tool free crimping cover to prevent cable falling off and reduce poor contact caused by dust. -The module has EIA color code stickers, which comply with two wiring methods of T568A and T568B.

2022-06-27

Product advantage- ANSI/TIA 568.2-D, TIA/EIA 568-B.2 Cat.6 standards.- Short body design ( 50mm), suitable for most AP and other terminal equipment.- Repeatedly plug and unplug more than 1000 times.- Gold plating of contact surface shall comply with UL/CSA FCC part 68 standard.- Comply with RoHS 2011/65/EU environmental protection standards.Product characteristicsPlastic insulation material, polycarbonate, UL-94V-0Contact plating: 50μ Gold plated +100μ plate with nickelSurface material voltage

2022-06-09

Product advantage- Comply with TIA/EIA 568-B.2-1, ANSI/TIA 568.2-D Cat.6 and ISO/IEC 11801 2nd class E.- Advanced stranding process is adopted for Cat.6 of multi stranded copper wire jumper, with a transmission bandwidth of 250MHz.- The outer skin is made of standard flame-retardant material and can be selected with flame-retardant PVC and LSOH low smoke halogen-free.- Mechanical crimping protective sleeve and RJ45 shrapnel protection design are adopted.- It can provide jumpers of eight colors,