FL-68H, FL-68L Cat.6 Unshielded Patch Cord, U/UTP, 28AWG
Product advantage
- Comply with TIA/EIA 568-B.2-1, ANSI/TIA 568.2-D Cat.6 and ISO/IEC 11801 2nd class E.
- Advanced stranding process is adopted for Cat.6 of multi stranded copper wire jumper, with a transmission bandwidth of 250MHz.
- The outer skin is made of standard flame-retardant material and can be selected with flame-retardant PVC and LSOH low smoke halogen-free.
- Mechanical crimping protective sleeve and RJ45 shrapnel protection design are adopted.
- It can provide jumpers of eight colors, meeting TIA-606 color management standard.
- Comply with ROHS 2011/65/EU environmental protection standards.
Product characteristics
RJ45 connector conforms to UL/CSA FCC part 68, sub part F
Cable insulation material conforms to UL-94V-0
Contact plating: 50μ Gold Plated /100μ plate with nickel
Interface plugging times: >1000
Plug and pull resistance: minimum 11lbf (50N) between plug and interface
Outer diameter: 3.8+/-0.2mm (28AWG)
Maximum DC resistance: <22.3 Ω /100m at 20 ℃
Mutual capacitance: <5.6nf/100m
Applicable temperature: -20 ℃ to +75 ℃
Insulation strength (conductor conductor):1000VAC, 60hz/1min
Insulation impedance: >500M ohms (500VDC)
Contact impedance: <35M ohm
Rated voltage / current: 150VAC/1.5Ampere
Inner conductor gauge: 28AWG stranded copper
Cable sheath material: PVC or LSOH in accordance with IEC 60332-1-2
Meet the standards
TIA/EIA 568-B.2
ANSI/TIA 568.2-D
ISO/IEC 11801 2nd Edition
EN 50173 2nd Edition
EN 55022 Class B
Can be used
10/100Base-T
1000Base-T
2.5G/5GBase-T
1.2/2.4Gbps ATM
TP-PMD(ANSI X3T9.5 100Mbps)
4/16Mbps Token Ring
ISDN、VoIP
Order information
Transmission Characteristics
P2.06.13_Cat.6 Unshielded Patch Cord,U-UTP,28AWG.pdf
Recommend
-
-
QQ Zone
-
Sina Weibo
-
Renren.com
-
Douban