Product advantage

- ANSI/TIA 568.2-D, TIA/EIA 568-B.2 Cat.6 standards.

- Short body design (< 50mm), suitable for most AP and other terminal equipment.

- Repeatedly plug and unplug more than 1000 times.

- Gold plating of contact surface shall comply with UL/CSA FCC part 68 standard.

- Comply with RoHS 2011/65/EU environmental protection standards.

Product characteristics

Plastic insulation material, polycarbonate, UL-94V-0

Contact plating: 50μ Gold plated +100μ plate with nickel

Surface material voltage withstand strength: 1000V DC

Applicable temperature: -20 ℃ ~+75 ℃

Plug and pull resistance: minimum 11lbf (50N)

Interface plugging times: >1000

Insulation strength (conductor conductor):1000VAC, 60hz/1min

Insulation impedance: >500M ohms (500VDC)

Rated voltage / current: 150VAC/1.5Ampere

Applicable wire: 23AWG~26AWG

Meet the standards

TIA/EIA 568-B.2-1 Category 6

ANSI/TIA 568.2-D Category 6

ISO/IEC 11801 2nd Edition

Can be used

10/100Base-T

1000Base-T

2.5G/5GBase-T

TP-PMD(ANSI X3T9.5 100Mbps)

ISDN

VoIP

PoE+

Order information

P2.06.16_MPTL Cat.6 Unshielded field termination connector.pdf

P2.06.16_六类非屏蔽现场端接接头.pdf