2022-07-08

Since TIA officially issued the Cat.3 copper twisted pair standard (16Mhz bandwidth) based on 10BASE-T in 1990, the copper generic cabling system has been evolving iteratively.ISO followed closely, issuing the class C standard (equivalent to Cat.3) in 1995, and then upgrading the cabling of Cat.3/class C to the transmission application of 100BASE-T4.*Rongyang enterprise was established in Taipei in 1995 and has been rooted in the field of Ethernet generic cabling until now.Later, TIA issued Cat.

2022-05-29

- Comply with ANSI/TIA 568.2-D, TIA/EIA 568-B.2-10 Cat.6A and ISO/IEC 11801 2nd class EA, with a transmission bandwidth of 500MHz. - Use Cat.6A double-layer shielded S/FTP 26AWG stranded copper wire; Two terminal crimping shielded standard RJ45 connector. - The outer coating material is PVC or LSOH low smoke halogen-free type.

2022-06-01

Product advantage-Comply with ANSI/TIA 568.2-D, TIA/EIA 568-B.2-10 Cat.6A and ISO/IEC 11801 2nd Class EA standard, transmission bandwidth up to 500MHz.-Use Cat.6A shielded U/FTP 28AWG stranded copper wire; Two terminal crimping shielded standard RJ45 connector.-The outer coating material is PVC or LSOH low smoke halogen-free type.-It supports 10GBase-T applications and is downward compatible with any class E (cat.6) and class D (cat.5e) system wiring.-Comply with ROHS 2011/65/eu environmental pr

2019-12-31

Product advantage - It adopts advanced stranding process, conforms to ANSI / TIA 568.2-D Cat. 6, ISO / IEC 11801 2nd class E characteristic standard. - The cable center adopts the cross isolation structure design to prevent the line pair deformation and effectively reduce the generation of crosstalk. The transmission bandwidth can reach up to 250MHz. - Compatible with Fastlinkcabsys full series copper connectors. - The outer skin is made of standard flame-retardant material and can be flame-retardant PVC and LSOH low smoke halogen-free. -Comply with ROHS 2011 / 65 / EU environmental protection standard.

2022-06-27

Product advantage- It adopts advanced stranding process and conforms to ANSI/TIA 568.2-D Cat.6, ISO/IEC 11801 2nd class E characteristic standard.- The cable center adopts a cross isolation structure design to prevent pair deformation and effectively reduce crosstalk. The transmission bandwidth can reach up to 250MHz.- Compatible with fastlinkcabsys full series copper cable connectors.- The outer skin is made of PE, and black can effectively resist the penetration of ultraviolet rays to cause th

2019-12-31

-Cat.6 Unshielded Module complies with ANSI / TIA568 2-D Cat. 6、ISO/IEC 11801 2nd Class E and EN50173 2nd edition standard; The transmission bandwidth is more than 250MHz. -Support PoE + + (Type 4) application and passed ETL test. -The 110 IDC terminal of the circuit board adopts the press in technology, which can effectively reduce the capacitance effect and suppress the crosstalk. -The module is equipped with a rotary dust cover to reduce dust intrusion (IP20 rated). Eight modules of different colors can be selected according to the needs of application. Comply with TIA-606 color management standard. -Provide tool free crimping cover to prevent cable falling off and reduce poor contact caused by dust. -The module has EIA color code stickers, which comply with two wiring methods of T568A and T568B.

2022-06-27

Product advantage- ANSI/TIA 568.2-D, TIA/EIA 568-B.2 Cat.6 standards.- Short body design ( 50mm), suitable for most AP and other terminal equipment.- Repeatedly plug and unplug more than 1000 times.- Gold plating of contact surface shall comply with UL/CSA FCC part 68 standard.- Comply with RoHS 2011/65/EU environmental protection standards.Product characteristicsPlastic insulation material, polycarbonate, UL-94V-0Contact plating: 50μ Gold plated +100μ plate with nickelSurface material voltage

2022-06-09

Product advantage- Comply with TIA/EIA 568-B.2-1, ANSI/TIA 568.2-D Cat.6 and ISO/IEC 11801 2nd class E.- Advanced stranding process is adopted for Cat.6 of multi stranded copper wire jumper, with a transmission bandwidth of 250MHz.- The outer skin is made of standard flame-retardant material and can be selected with flame-retardant PVC and LSOH low smoke halogen-free.- Mechanical crimping protective sleeve and RJ45 shrapnel protection design are adopted.- It can provide jumpers of eight colors,

2022-06-20

Product advantage- The advanced twisted winding process is adopted to provide the highest stability scheme of Cat.5e shielded generic cabling system.- Comply with international safety regulations and ANSI/TIA 568.2-D Cat.5e. ISO/IEC 11801 2nd Class D characteristic standard.- The cable adopts F/UTP structure, and four pairs of twisted pairs are coated with a layer of aluminum foil Mylar tape, which can effectively reduce the generation of external crosstalk, and the transmission bandwidth reache

2022-06-20

Product advantage- Cat.5E shielded module meets ANSI/TIA 568.2-D Cat.5E、ISO/IEC 11801 2nd Class D and EN 50173 2nd Edition standards, with transmission bandwidth up to 100MHz and UL unit testing certification.- The module body is formed by metal mold, providing 360° shielding layer, which can achieve the best shielding effect.- The module is equipped with a rotary dust cover to reduce dust intrusion (IP20 rated) and reduce the failure rate of the module.- The circuit board IDC terminal adopts

2022-06-20

Product advantage- Cat.5E unshielded module meets ANSI/TIA 568.2-D Cat.5E, ISO/IEC 11801 2nd Class D and EN50173 2nd Edition standards and passed ETL unit testing certification.- The module is equipped with a rotary dust cover to reduce dust intrusion (IP20 rated). Modules of eight different colors can be selected according to the application requirements, which conforms to TIA- 606 color management standard.- The circuit board IDC terminal adopts the press in technology, which can effectively r

2022-06-24

Product advantage- The six connected circuit design is adopted, and the IDC terminal block is one-piece plastic injection molding; the overall structure circuit board is not exposed.- Features beyond ANSI/TIA 568.2-D Cat.5E, ISO/IEC 11801 2nd Class D and EN50173 2nd edition standard.- The back of the panel of the distribution frame can be equipped with a cable tray; guide incoming line and support cable weight to ensure high-speed transmission application quality.- Transparent acrylic sign windo

2022-06-24

Product advantage- ANSI/TIA 568.2-D Cat 5E, ISO/IEC 11801 2nd Class D characteristic standard, with a transmission bandwidth of 100MHz.- The outer skin is made of standard flame-retardant material and can be selected with flame-retardant PVC and LSOH low smoke halogen-free.- It adopts mechanical rubber filled protective sleeve and has RJ45 shrapnel protection design.- It can provide jumpers of eight colors, meeting TIA-606 color management standard.- Comply with ROHS 2011/65/EU environmental pro

2022-06-24

Product advantage- ANSI/TIA 568.2-D Cat.5E, ISO/IEC 11801 2nd Class D characteristic standard, with a transmission bandwidth of 100MHz.- The outer skin is made of standard flame-retardant material and can be selected with flame-retardant PVC and LSOH low smoke halogen-free.- It adopts mechanical rubber filled protective sleeve and has RJ45 shrapnel protection design.- It can provide jumpers of eight colors, meeting TIA-606 color management standard.- Comply with ROHS 2011/65/EU environmental pro